DIY Easy-Sew Baby Harem Bloomers

Posted by Lovely Indeed

You’d think that I was a regular Donna Reed up in here, sewing all of these goodies for baby girl! Truth be told, I only sew if it’s easy. So you can rest assured that none of these sewing projects are terribly scary in any way. In fact, if you can sew in a straight line you can tackle these. And I can’t stand how cute these little bloomers turned out, so I’ll probably end up making her a bunch more of them. It was also another chance to use my new EverSewn machine, which I’m completely smitten with. I realized as I was sewing these the other day that I was doing it while Ryan was on a work call in the same room and it was totally quiet! My old machine was crazy loud but this one barely makes a peep. Like, I could sew these in the same room while the kids were napping and I would still be golden. I’m into that.


  • soft fabric with some give. You could use the front and back of an old t-shirt, or a woven skirt, or just grab something cute at the fabric store. If you’re measuring yardage, I’d get 1/3 yard to be safe. You could probably get away with 1/4 yard if you’re reaaaallllly careful how you cut.
  • 1/2″ elastic
  • 1/8″ elastic
  • sewing machine and notions
  • scissors
  • safety pins
  • iron
  • printable bloomers pattern

Make Time: 1 Hour

Step 1: Print our bloomers pattern and cut out along the black outer line.

Step 2: Fold your fabric in half, being sure to arrange any patterns in the direction you’d like. Place the folded edge against the line on the pattern that says “Cut 2 On Fold.” Pin the pattern to the fabric and cut around the edges (do not cut your fold apart). Repeat this so that you have two identical pieces.

Step 3: Place right sides together and pin the two pieces to each other. Sew a straight stitch down both sides and around the crotch.

Step 4: On the waistband, fold over 3/4″ and fold again so that the raw edge is hidden. Iron in place. Repeat on both leg holes, only folding over 1/2″ each time.

Step 5: Sew a straight stitch around the waist and leg holes, leaving a 1″ opening on each hole through which you’ll insert the elastic.

Step 6: For the waist, cut 15″ of 1/2″ elastic. Attach a safety pin to one end and fish it through the open hole, all the way around the waist, and back out the same open hole.

Step 7: Overlap the ends of the elastic by about 1/2″ and sew them together.

Step 8: Pull the elastic entirely inside the waist casing and sew the open 1″ of casing closed.

Step 9: Repeat Steps 6-8 for each leg hole. For each hole, use 7″ of 1/8″ elastic.

Step 10: Flip the bloomers right side out, adjust the elastic so that it’s evenly spread, and put those babies on your baby!

Just a note — for sewing the 1/8″ elastic ends together, it’s easiest if you just lay them on top of each other with the ends pointing the same direction. Place them under the sewing machine’s presser foot. I then used my EverSewn machine’s auto-lock button, which sews a few locking stitches right in place. Way easier than trying to stitch a line down that tiny elastic! Another reason I love this new machine. Also, FYI — this pattern is sized for a little one that’s 0-3 months. So if you want to size it up, just enlarge the pattern to your kiddo’s size.

So! In just about a week’s time these little bloomers will be filled with some fresh baby buns and I cannot wait. Until then, stay tuned for one more simple sewing tutorial, coming soon!

All photos by Lovely Indeed

This post is sponsored by EverSewn. All ideas and opinions are my own. Thank you for being supportive of the brands who help keep Lovely Indeed rocking!

PrintView Printer Friendly Version

EmailEmail Article to Friend

References (2)

References allow you to track sources for this article, as well as articles that were written in response to this article.

Reader Comments (2)

very nice posting

December 16, 2016 | Unregistered Commenterjasa seo


December 16, 2016 | Unregistered CommenterLAKE TOBA TOUR PACKAGE

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>
« Victory Patterns | Main | Pizza Plush DIY »